What is Paint Protection Film?

 

Paint Protection Film is commonly referred to as a clear bra or invisible bra. We install these films on vehicles, boats and planes. Having the film installed provides impact protection that would otherwise require expensive and time consuming matching paint colors, repainting and refinishing.  XPEL Ultimate  Paint Protection Films combine best-in-class durability and clarity not previously available on the market. Rock Guard Film installers are factory trained and certified by XPEL Technologies. We strive to exceed industry standards, giving you the confidence you need to hit the road and enjoy your investment.

 

Scroll Down for FAQ

FAQ

How does XPEL Ultimate Paint Protection Film heal itself?

XPEL Ultimate Paint Protection Film uses a special polymer in its clear coat that flows even though it is cured. This allows the clear coat to find its natural level again after being disturbed on the surface.

How deep of a scratch will it heal?

The clear coat is designed to heal surface scratches and common swirl marks that occur during routine washing of the car. If the scratch penetrates through the film’s clear coat, it will not heal.

How long does it take for a scratch to heal?

The time for a scratch to heal depends on the severity of the scratch and the ambient temperature. Minor scratches usually heal in one hour at room temperature (72°F). In warmer climates, healing time will be shorter. The healing process can be accelerated at any time by pouring hot water over the scratched area.

How many times will the clear coat heal itself?

With this technology, there is no limit to the number of times the clear coat can heal itself. As long as the clear coat is not penetrated it will heal over and over again.

How long will the clear coat last?

Depending on how the film is cared for, the clear coat can last indefinitely. Regular washing and waxing will keep the clear coat in top condition for years to come.

Stains & Chemical Resistance

How does XPEL Ultimate Paint Protection Film resist staining?

The clear coat on XPEL Ultimate has a very low surface energy, which makes it extremely difficult for organic compounds
to stick to the film. Insects, bird droppings and environmental contaminants (which would normally cause yellowing) such
as road oils, exhaust smoke and pollution can be removed during regular washing. An example of a similar technology
would be Teflon, where a Teflon pan is easy to clean because nothing will stick to it.

What if a stain does not come off the film during normal washing?

If ordinary car wash or soap and water will not remove a stain, there are a variety products available to do the job. In most cases simple isopropyl rubbing alcohol will remove anything on the surface of the film. In cases of more severe staining, or where something has been left on the film for a long period of time, a sparing amount of lacquer thinner can be used. Bug and tar remover available at any auto parts store is also effective. If you are unsure about the use of any other chemical on the surface of the film, please contact XPEL Support at 800-447-9928 for assistance.

How to Care for the Film

How is care of XPEL Ultimate different than other films?

XPEL Ultimate Paint Protection Film requires less maintenance than any other brand of film on the market. Our general care instructions are:

• Wait 48 hours after installation to wash your car

• Remove insect or other stains with bug and tar remover

• Stubborn stains can be removed with 99% isopropyl alcohol or lacquer thinner. Take care to keep these chemicals off the vehicle’s paint

• Seal with XPEL Flawless Finish Paint Protection Film Sealant at least once every 3 months to preserve high gloss

• Light scratches in the film will self-heal in 20-30 minutes at room temperature. In colder conditions, or to accelerate the process, pour warm water (120°F) over the affected area

Can I wax the film when I wax the rest of the car?

Unlike most paint protection films on the market, XPEL Ultimate Paint Protection film can be waxed and sealed just like
your paint. Though XPEL Flawless Finish Paint Protection Film Sealant is still the preferred product, Any automotive wax or sealant may be used.

Will XPEL Ultimate make the paint underneath the film fade at a different rate?

No. XPEL Ultimate Paint Protection Film allows UV to pass through the film and fade the paint underneath at the same rate as the exposed paint.

Warranty Coverage

XPEL Ultimate 10 Year Warranty

XPEL ULTIMATE PLUS paint protection film is warranted to be free of manufacturers defects for ten (10) years from the date of purchase. This is a nationwide warranty, in the event that you move to another part of the country your warranty will be handled by another authorized XPEL installer. Covered defects include: yellowing, staining, cracking, blistering and delaminating. The warranty does not extend coverage to damage caused by normal wear and tear, road debris impact, accidents, collisions or intentional damage of any kind. The warranty holder must retain the warranty card issued at the time of installation. A valid warranty claim will allow for the replacement of the defective film including parts and labor.

Scrape Armor Warranty

Every Scrape Armor kit is backed with a lifetime warranty and recognized on your vehicle’s CarFax report as part of Scrape Armor’s official CarFax partnership. Upon completion of installation, Rock Guard Film will register your new Scrape Armor kit with CarFax to offer your full warranty benefits. If at any point your Scrape Armor wears down to less than 2mm we’ll replaced it free of charge.

How does my vehicle get to your Facility?

You can either drop it off to our facility at 6801 W Tilghman St, Unit 105 Allentown, Pa or we can schedule a pick up and drop off time and date for your convenience. Our transporter is sure to get your vehicle to our facility safely and promptly.